


Valve Body
Valve Body Seal Material Selection List


TYPICAL APPLICATION
Car Wash / Water Quality / Misting / Food and Beverage / Energy / Healthcare / Special FX / Temp Control / Cryogenics
SOLENOID VALVE & COILS
SOLENOID VALVE & COILS
SIGNAL FEEDBACK SOLENOID VALVE
SIGNAL FEEDBACK SOLENOID VALVE
Solenoid valve add the pressure transmitter can know the valve is open or closed. The voltage shown is linearly proportional to pressure.
-
Measure pressure range: 0~16bar
-
Outlet voltage: 0.5~4.5V
-
Inlet voltage: DC5V
-
Thread: G1/8
-
Fluid Temp.: 0~+80°C
-
Media: Water, Air
-
Connect Type: Red Lead +5VDC Black Lead: Public earth line Green Lead: Output 0.5~4.5VDC
-
Accuracy class: ± 1% F.S
External Dimensions

Application

Note: Optional solenoid valve, please check the Solenoid Valves numbering system for order options item.
WIDE VOLTAGE COIL
WIDE VOLTAGE COIL
-
Voltage: 24~240V
-
AC=DC
-
Smaller than normal coil
-
Prolonged electrification won't reduce the Electromagnetic force
-
Low temperature, longer lifetime
-
Quick reaction
-
Suit for high(low) temperature solenoid valve
-
IP65
Coil Parameters Tables

Coil External Dimensions

Application

FLAMEPROOF ELECTROMAGNETIC COIL
FLAMEPROOF ELECTROMAGNETIC COIL
Flameproof coil is all the devices may be lit with explosive gas mixture components enclosed in a shell, the shell can withstand any shell surface or structure clearance, infiltrate into the inside of the shell of combustible mixture in the internal explosion damaged, not caused by an outside and a variety of gas or steam formation of explosive environment to light.
-
Ambient temp.: -20°C~+55°C
-
Allowable pressure: 80~110kpa Relative humidity: ≤95% (+25°C)
-
Voltage: AC220V, DC24V (other voltage can be requested)
-
Seals: NBR, EPDM, VITON
-
Flameproof grade: Ex d IIB T4 Gb
-
IP Code: IP65
-
Explosion-proof standard: GB3836.1 , GB3836.2
-
Temperature level T4: Safe object surface temperature ≤ 135°C
-
It is suitable for other explosive gas environment except coal mine gas and the place containing II A, II B T1~T4 explosive gas environment zone 1 and 2
-
Flow as the arrow, mounts in any position, best position is solenoid vertical and upright direction
-
Specification for thread of cable outlet device: M20x1.5 if the cable protective cover needs to be installed, the certified explosion-proof connector must be used
Parameter

External Dimensions


SLX TIMER SWITCH DEVICE
SLX TIMER SWITCH DEVICE
Analog Electronic Timer
-
Working voltage: 24-220v AC/DC 50Hz/60Hz
-
Static electricity: 4mA Max
-
Working temperature: -10°C ~ +50°C
-
Protection level: IP65-EN 60529
-
Keeping voltage: 400V Max
-
Capacity: 1A
-
Instantaneous current: 10A for 10ms
-
Electrify efficiency: 100%ED
-
The life cycle of the switch: 3 x 108
-
Time ON: form 0.5~10s
-
Time OFF: form 0.5~45min
-
Indicator: Yellow LED Test
-
Connection Type: DIN43650A
Digital Electronic Timer
-
High quality flame retardant plastic shell, high strength and security
-
Microcomputer chip control, powerful, high precision
-
LED digital tube display with night vision function
-
Time adjustment: range: two-way adjustable time switch, ON time 1Sec ~ 9min59Sec: OFF time 1Sec ~ 99h59min59Sec
-
Function mode: loop mode (two ways: first on then off or first off the on)
-
Power supply: high-voltage AC/DC 110~240V (XY-3800H) Low-voltage AC/DC 7~36V (XY-3800L)
-
Protection IP65 when properly installed
-
The standard DIN43650A input and output interfaces
-
If indicator is lit, it is ON state, otherwise it is the OFF state
-
Field of use: solenoid valve controlling and other similar timing application

COIL TYPE
COIL TYPE SLECTION LIST
Photo
Type
Class
Model No.
Size (mm)
L X W X H or Diameter

A: Metallic Housing DIN Standard
F
ZS Normally Closed Φ4~Φ25
ZCM Φ5~Φ25
Φ16.3
Diameter: Φ50 H:41mm

DF: Coils Metallic Housing DIN Standard
H
ZS Normally Open Φ16~Φ25
ZCM Normally OpenΦ15~Φ25
Φ15.3
Diameter: Φ56 H:57.5mm

D: DIN Standard Connection Fully Encapsulated
F
ZS Normally Closed Φ32~Φ50
Φ20.3
Diameter: Φ73 H:50mm

A: Big Coils Metallic Housing DIN Standard
F
ZS Normally Open/Closed Φ32~Φ50
ZCM Φ32~Φ50
Φ20.3
Diameter: Φ68 H:61.5mm

D: DIN Standard Commercial Fully Encapsulated
F
ZS Normally Closed Φ4~Φ25
SLP2 Normally Open Φ13~Φ50
SLA Normally Closed/Open Φ15~Φ50
SLP Normally Closed Φ65~Φ100
Φ16.3
L x W x H: 54x38.5x40

D: DIN Standard Commercial Fully Encapsulated
F
SLP1 Normally Closed Φ3~Φ50
SLP2 Normally Open Φ1~Φ4 (body:9)
SLV Series (body: 1&3)
SLE Series, ZCT Φ3
SLP2 Normally Open Φ2.5~Φ3
ZS Φ10 (body:9)
SLT Series, DMF-Z Series
Φ14.7
L x W x H: 38.5x35.5x42

N: Lead Wires Watertight Fully Encapsulated
F
ZS Normally Closed Φ4~Φ25
SLP2 Normally Open Φ13~Φ50
Φ16.3
L x W x H: 54x38.5x40

D: DIN Standard Connection Encapsulated
F
SLG Φ1~Φ2.5
Nass: Coil
Φ14.7
L x W x H: 44.5x35.5x42

N: Lead Wires Watertight Fully Encapsulated
F
SLP Series Φ3~Φ50
Φ14.7
L x W x H: 57x36x42