Water Filtration and Purification Equipment Supplier
Reverse Osmosis System Parts and Supplier
Commercial and Residential Wave Cyber DI & Pressure Tanks Supplier
Water Filtration Manufacturer Distributor Vendor Water Purification
Vontron RO Nanofiltration Ultrafiltration Membrane Distributor
Valves
316 Stainless Steel Needle Valve's
Compact and reliable, these corrosion-resistant 316 stainless steel needle valves are available in sizes ranging from 1/8" to 3" for laboratory and industrial applications. Precision engineered and 100% factory tested, these valves are designed for leak free service up to 6000 PSI.
Features
-
Sizes: 1/8: through 3"
-
Non-corrosive 316SS valve body
-
Up to 6000psi working pressure
-
NPT, BSPT, and other thread types available upon request
-
100% tested in factory
-
Compact and reliable, designed for laboratory and industrial applications
-
Excellence in design and tooling assures reliability and minimizes sources of leakage
-
Private label available upon committed purchasing quantity
Model: NV-1/8-SSF-P
Style:316 SST
Size: 1/8" X 1/8"
DN: 4
Model: NV-025-SSF-P-PH
Style:316 SST
Size: 1/4" X 1/4"
DN: 4
Model: NV-025-SSF-P
Style:316 SST
Size: 1/4" X 1/4"
DN: 4
Model: NV-025-SSM
Style:316 SST
Size: 1/4" X 1/4"
DN: 4
Model: NV-050-SSF-I
Style:316 SST
Size: 1/2" X 1/2"
DN: 7.8
Model: NV-050-SSF-P
Style:316 SST
Size: 1/2" X 1/2"
DN: 7.8
Model: NV-075-SSF-I
Style:316 SST
Size: 3/4" X 3/4"
DN: 9
Model: NV-075-SSF-P
Style:316 SST
Size: 3/4" X 3/4"
DN: 9
Model: NV-075-SSM
Style:316 SST
Size: 3/4" X 3/4"
DN: 9
Model: NV-100-SSF-P
Style:316 SST
Size: 1" X 1"
DN: 12
Model: NV-150-SSF-P
Style:316 SST
Size: 1.50"
DN: 12
Model: NV-200-SSF-P
Style:316 SST
Size: 2" X 2"
DN: 12
Model: NV-300-SSF-P
Style:316 SST
Size: 3" X 3"
DN: 12
Solenoid Valves
EWP-USA' solenoid valves are constructed of high quality, lead-free brass, and 316 stainless steel. They are corrosion-resistant, they offer high flow rate capacities, and are easy to install - Great for commercial and industrial use.
SLP- Series
Features
-
Sizes: 1/4" - 2"
-
Coil Style: DIN or NEMA
-
Voltages: 110v / 220v / 24v-AC / 24v-DC
-
Two Way - one inlet and one outlet connection
-
Internal Pilot Operated
-
Normally Closed - closed when de-energized and open when energized
-
EPDM diaphragm and seal
***SLP-Solenoid needs to meet a minimum requirement of 7psi, for proper differential***
ZS- Series
Features
-
2-Way normally open solenoid valve, open when de-energized, Closed when energized.
-
2/2 way normally closed, closed when de-energized, open when energized.
-
Body Material: Brass or Stainless Steel
-
Working Pressure: 0~13kgf/cm²; Ambient Temp. 0°C ~ 65°C
-
Serialized products, small in size, large flow rate, widely used.
-
Flow as the arrow, mounts in any position; Best position is Solenoid vertical and upright direction.
-
Voltage: AC 110V/220V/24V/ DC 24V - Voltage tolerance: +10% to -10% applicable voltage.
1/4" Solenoid Valves
Normally Closed
1" Solenoid Valves
Normally Open & Closed
3/8" Solenoid Valves
Normally Open & Closed
1 1/4" Solenoid Valves
Normally Open & Closed
1/2" Solenoid Valves
Normally Open & Closed
1 1/2" Solenoid Valves
Normally Open & Closed
Solenoid Valves Flange
3/4" Solenoid Valves
Normally Open & Closed
2" Solenoid Valves
Normally Open & Closed
ZS- Series Solenoid Valves (Normally Open)
ZS Plastic Series 2/2-Way Zero Press Differential Solenoid Valve - N/O
-
2/2-Way Normally open solenoid valve.
-
Open when de-energized, closed when energized
-
Body Material: Nylon
-
Max Pressure: 10bar Ambient temp 0°C ~ 65°C
-
Serialized products, small in size, large flow rate
-
Voltage tolerance: -10% ~ +10%
-
Diaphragm seal: EPDM
-
Plastic body: advantages are low cost, light, good appearance and easy to install.
ZS- Series Differential Solenoid Valves (Normally Closed)
ZS Plastic Series 2/2-Way Zero Press Differential Solenoid Valve - N/C
-
2/2-Way Normally closed solenoid valve.
-
Closed when de-energized, Open when energized
-
Body Material: Nylon
-
Max Pressure: 10bar Ambient temp 0°C ~ 65°C
-
Serialized products, small in size, large flow rate
-
Voltage tolerance: -10% ~ +10%
-
Diaphragm seal: EPDM
-
Plastic body: advantages are low cost, light, good appearance and easy to install.